MET 102 Expert System - Tolerances

TOLERANCES

Reference

Drake, P. Jr. (Ed.). (1999). Dimensioning and tolerance handbook. New York: McGraw-Hill.
REF 620.0045 D592 1999
Available via http://www.knovel.com/knovel2/Toc.jsp?BookID=330

Oberg, E., Jones, F.D., Horton, H.L., Ryffel, H.H., McCauley, C.J. et al (Eds.). (2008). Machinery's Handbook (28th ed). New York: Industrial Press.
REF 621.08 M18m
Latest edition on Reserves at Circulation Desk and at Reference.
Editions 26 and 27 are available via http://www.knovel.com/knovel2/Toc.jsp?BookID=1074

Avallone, E.A. (Ed.). (1996). Mark's standard handbook for mechanical engineers (10th ed.). New York: McGraw-Hill.
621 M4645 1996
Available via http://www.knovel.com/knovel2/Toc.jsp?BookID=346

Ballast, D.K. (2007). Handbook of Construction Tolerances. 2nd Ed. New York: McGraw-Hill.
REF 690 B212h 2007

Lingaiah, K. (2003). Machine Design Databook (2nd ed.) New York: McGraw-Hill.
REF 621.815 L646m 2003

Main Stacks

Griffith, G.K. (2002). Geometric Dimensioning and Tolerancing: Applications and Inspection. Upper Saddle River, NJ: Prentice Hall.
Mezzanine 620.0045 G875m 2002

Meadows, J.D. (1998). Measurements of Geometric Tolerances in Manufacturning. New York: Marcel Dekker.
Mezzanine 620.0045 M461m 1998

Online

IHS. Specifications and Standards Database.(2000). [Database] Available via http://purl.lib.purdue.edu/db/db159

Knovel. (2007). [Database]. Available via http://purl.lib.purdue.edu/db/knovel